Instructions for Use of an Arm and Shoulder Garment

Open garment, holding sides of chest belt, to allow for insertion of arm into garment.

Slide/Pull Garment up to the shoulder. It should fit snugly into the armpit area.

Pull the loop side of the chest belt into position, around the back and up the chest.

Pull the hook side of the chest belt across the chest to snugly match the loop side and press Velcro to secure.

After turning off the pump….
For quick release, flex the arm at the elbow to force the air from the sleeve. With some of the air removed, you should be able to slide your arm out.

To remove remaining air, roll the sleeve up from the hand to the shoulder.